Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Lennox Air Duct Cleaning in Garland, TX
We provide independent Lennox air duct cleaning across Garland, and the one thing that sets our Lennox work apart here is containment: we hold the whole system under negative pressure while brush equipment scours the duct walls, so nothing we loosen recirculates back into your living room. Our technicians have up to 13 years of experience on Lennox equipment, and we use professional-grade machines on every job instead of a shop vacuum. This is a scheduled service, and the written estimate sets your price before we start. Call (888) 430-9938 for a free estimate.
Why Garland Residents Choose Us for Lennox Service
We work on Lennox systems specifically, which means we know how Lennox ducted air handlers, the Merit and Signature series, and the HCX Series air handlers handle North Texas heat and Garland storms. That focus comes from time spent on the equipment, not from any manufacturer affiliation. Duct Cleaning Garland is an independent provider, not a Lennox dealer and not authorized by the manufacturer.
Lennox homes throughout Garland have their own usual failure points, and getting the right parts matters. We use OEM Lennox parts for critical components like blower motors and control boards, and quality aftermarket ducting and sealants where they meet or exceed OEM specifications. The result is a repair that fits and lasts rather than a stopgap.
Scheduling is straightforward. Tell us what your Lennox system is doing, and we’ll set a time. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Common Lennox Air Duct Cleaning Problems We Solve in Garland
- Brittle tape and failed mastic on rigid plenums. Duct tape and mastic on Lennox galvanized plenums and trunk lines embrittle and crack in Garland attics that climb past 140°F. Those supply leaks then pull attic insulation fibers straight into the air you breathe.
- Collapsed or torn flex duct at connections. Lennox flex runs in the 1970s-80s east Garland tract subdivisions tear and sag after repeated heat cycling, dropping fiberglass particles into the supply air over time.
- Contaminated returns after a roof replacement. Lennox systems with central hall-closet air handlers often pull shingle grit and loose insulation into the return after spring hail roof work, clogging filters and coating the evaporator coil.
- Gaps at original taped joints. Older Lennox air handlers in unconditioned attics develop gaps that admit oak pollen and dust during the dry-then-humid swings, cutting airflow and coil efficiency.
- Deteriorated seams in 1950s-60s ranches. The older rigid galvanized runs near downtown Garland have leaky joints in hot attics, and a system that’s leaking that much needs repair alongside cleaning to hold its pressure.
Lennox Service in Garland: What Local Conditions Mean for Your Equipment
Garland’s east side tells a specific story for Lennox owners. Spring hail storms roll through and roofers end up on nearly every block, and in the process they push shingle grit and loose fiberglass insulation into the return ducts of attic-run systems. That’s why duct cleaning calls here spike from April to June, and it’s a pattern you don’t see nearly as much in neighboring Richardson or Rowlett.
If you own a Lennox system with a hall-closet air handler or flex duct through the attic, that grit ends up on your filter and your evaporator coil. It’s not a comfort issue so much as an airflow one. When we open the return on a Garland home after a roof replacement, we expect to find construction debris resting where the air first enters the system. Cleaning the return, the supply runs and the coil together is what clears it. A filter upgrade after cleaning is often the difference between a fix that holds and one you repeat every hail season.
Lennox Models & Products We Service in Garland
We service the Lennox ducted equipment you’ll find in Garland homes: Merit Series, Elite Series and Signature Series systems, and HCX Series air handlers. That includes the supply and return ductwork, the air handler cabinet and its connections, and the evaporator coil cleaning that goes with the duct work.
Choosing parts means matching what the system needs. Critical components get OEM Lennox parts. Ducting and sealants get quality aftermarket products where they meet or exceed OEM specs. We don’t stock parts and we don’t claim to, so we source what a specific job requires. For systems over 15 years old with widespread duct deterioration, we’ll tell you honestly whether targeted repairs make sense or whether full duct replacement is the better spend.
See the difference
Before
After
Before
After
Before
AfterLennox Service Pricing in Garland
Duct cleaning is priced per system, by written estimate, after we see the layout. Your estimate is free. Several things move the number: how many supply and return runs there are, how much of the ductwork runs through the hot attic, whether joints need mastic work, and whether we’re also cleaning the evaporator coil. Older Garland ranches with original flex duct and leaking joints take longer than a 1990s subdivision home with tighter runs. Single-story ranch homes built between 1955 and 1985 tend to be the ones where repair and cleaning come as a package.
We give you one flat price per system, agreed before work starts, and before-and-after photos of your own ducts so you can see what changed. Call (888) 430-9938 for an exact quote. Estimates are free.
Serving Garland, TX – Our Local Coverage Area
We serve Garland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Lennox Air Duct Cleaning in Garland
Expect a full inspection first, because original rigid galvanized runs in a 1960s Garland ranch usually have at least a few failing joints. The technician brushes and vacuums each run, then reseals joints with mastic where they’ve lost their seal. In a typical Garland ranch home with a Lennox Merit Series air handler, homeowners notice increased dust and reduced airflow after a spring roof replacement, so the technician often finds shingle grit and insulation fibers pulled into the return through attic gaps, then cleans the system, reseals joints and may recommend a filter upgrade to keep it from returning. Call (888) 430-9938 for a free estimate.
Roofers working the spring hail season across Garland’s east side push shingle grit and loose fiberglass insulation into attic return ducts, and your Lennox system pulls that debris through the return into the filter and coil. Cleaning the return and supply runs together and resealing the attic joints clears it.
Garland attic temperatures push well past 140°F in summer, and that heat cycles the flex duct and its tape connections until they sag, tear or let go. Lennox flex runs in the 1970s-80s east Garland subdivisions are the ones most often found collapsed at connections, dropping fiberglass into the supply air. Cleaning plus repair restores the run; a torn section gets replaced.
In most cases yes, the coil can be cleaned in place on a Lennox air handler. Access depends on the cabinet and how much clearance the hall closet allows. We assess it during the inspection and tell you what the job involves before any work begins.
The supply side pushes conditioned air out to the rooms; the return side pulls air back in, and in a Lennox system with a hall-closet air handler the return is where most of the grit and insulation collects. Both need cleaning on the same visit. Cleaning only one leaves half the contamination in place. Call (888) 430-9938 for a free estimate on your system.
Service Areas Near Garland
We also take on Lennox air duct work in the towns around Garland, including Sachse to the east, Rowlett along the lake, McLendon-Chisholm, Talty and Crandall. If you’re just outside our usual Lennox coverage area, call and we’ll tell you what we can do. You can find our main Garland service page for the full picture of how we work.
Book Your Lennox Service in Garland Today
If your Lennox system is blowing dust, losing airflow or hasn’t been cleaned since the last hail season, call (888) 430-9938 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We’ll inspect the system, give you one flat price per system before any work starts, and show you before-and-after photos of your own ducts when we’re done.
Written by the team at Duct Cleaning Garland.